Search
  • Classic - Teleblaster (Blk) Mix Photo
    The new bridge plate with humbucker installed. The guitar was then proplerly setup and intonated.
  • Classic - Teleblaster (Blk) Mix Photo
    I cut in a new piece of maple to replace the incorrectly drilled holes and installed the string ferrules.
  • Classic - Paul Brady FG180's Mix Photo
    The neck was badly worn, dinged and chipped. This was taken after I had repaired and refinished the neck.
  • Classic - Paul Brady FG180's Mix Photo
    These are two Yamaha FG180's belonging to singer songerwriter Paul Brady
  • Classic - Teleblaster (Blk) Mix Photo
    The owner wanted to put in a full sized humucker and wanted to string from the back. He tried drilling the holes himself but messed it up.
  • Classic - Zakk Wylde Mix Photo
    Here we see it in the full glory of it's new incarnation. A copy of the Zakk Wylde paint work
  • Classic - My Photos Mix Photo
  • Classic - Zakk Wylde Mix Photo
    Here we see a regular run of the mill, common or garden, Gibson Les Paul Studio
  • Classic - Zakk Wylde Mix Photo
    Here we see the same guitar after a bit of paint work but before any coats of lacquer
  • Classic - McGettigan Lowden Mix Photo
    New saddle slots are routed and saddles cut for proper setup and intonation.
  • Classic - JJ72 Strats Mix Photo
    Here you can see the holes filled with maple dowels. This was a 70's Strat. They generally only had three holes for the neck pocket.
  • Classic - JJ72 Strats Mix Photo
    This was a more modern Strat (date printed). Again this had recieved a lot of on stage "abuse". Some temporary repairs had been do
  • Classic - JJ72 Strats Mix Photo
    The guys had a habit of smashing their guitars onstage. Eventually the screw holes had to give
  • Classic - JJ72 Strats Mix Photo
    The screws were just turning in their own holes, the threads were gone. I drilled the old holes out and filled them maple dowels
  • Classic - JJ72 Strats Mix Photo
    Again the holes were filled with Maple dowels I made. New holes were drillled and the guitars set up and serviced.
More
Close

Press esc to close.
Close
Press esc to close.
Close

Connecting to your webcam.

You may be prompted by your browser for permission.